Broader pallet access
Rear counterweight balances the load without support legs extending beneath it. This helps with mixed pallet designs and direct pickup, subject to fork openings, entry direction and the configured lifting capacity.
LETENG · Electric material handlingElectric Forklift
Electric Forklift
Manufacturer
in China
LETENG manufactures electric counterbalance forklifts in China, with a published range from 1.2 to 7 tonnes. Compare lithium or lead-acid batteries, mast options and attachments, then confirm the configuration for your loads, working space and market.
1.2–7 tNominal capacity range
Battery choiceLithium or lead-acid
OEM supportFor distributor projects
Capacity comes firstDifferent loads.
Different loads.
Different starting points.
Choose a capacity range to begin. Then confirm the load centre, lifting height and attachment combination. A nominal tonnage is a starting point, not the capacity of every lift.
Availability, dimensions and rated capacity must be confirmed for the selected model. Images show representative configurations and are not a specification sheet.
Why counterbalance electricUseful advantages.
Useful advantages.
Where the work happens.
Electric power and counterbalance construction solve different parts of the handling task. Understand both before comparing model names.
Control at the rack
Mast tilt helps set the fork angle for pickup and placement. A suitable side shift can make lateral alignment easier. Specify attachments before checking capacity: their weight and load offset matter.
Electric power indoors
Battery operation produces no tailpipe exhaust at the truck and avoids engine idling during stops. Match the battery and charging plan to the shift; site ventilation and battery-handling requirements still need attention.
Configuration, not guessworkBuild around
Build around
your working day.
The best configuration is the one that fits the complete cycle—from the first pallet to the next charge.
- Battery + charging
Compare lithium and lead-acid options for the selected model. Provide operating hours, break periods and available electrical supply. Confirm the matching charger, charging time and battery care requirements before ordering.
- Mast + building clearance
Specify both the highest placement and the lowest doorway. Ask for lowered mast height, full lift height and free lift where needed, rather than choosing a mast by maximum height alone.
- Cab + operator environment
Discuss visibility, entry and exit, seat layout and weather protection for the route. An enclosed cab is a configuration choice; confirm its height, ventilation and suitability for the working environment.
Details worth comparingCompare the truck
Compare the truck
you will actually use.
A quotation should make the configuration clear. Ask which features are standard, which are optional and which depend on the model.
- Make the specification explicit
Confirm the battery, charger, mast, fork dimensions, tyres and attachments together. This keeps different quotations comparable.
- Plan service access
Discuss routine checks and replacement parts for the proposed configuration. For a fleet, agree on the parts to keep locally and the information needed to identify them.
Factory supportFrom a clear brief
From a clear brief
to a confirmed configuration.
For an electric forklift order, agree the battery and charger, mast dimensions, forks and attachments as one specification. Provide your charging supply and operating schedule, then review capacity at the required height. Distributor projects can include approved brand artwork and a model-specific spare-parts list.
Application review
Share load weight and dimensions, lift height, pallet design and the working route.
Specification confirmation
Review the model, battery, charger, mast, attachments and any private-label requirements.
Order preparation
Review an itemised specification covering the truck, battery, charger, mast and attachments. Agree the inspection evidence and documents required for your destination, then confirm lead time against that specification. Record any configuration change before approving dispatch.
Export + support
Confirm packing, the named delivery point and which freight charges are included. Agree warranty scope, the service contact and a model-specific spare-parts list in writing. Distributor orders should identify the configuration and parts needed for each model.
Before you orderClear answers.
Clear answers.
Better decisions.
Capacity, battery and pallet questions to resolve before comparing quotations.
What electric forklift capacities does LETENG supply?
The current range shown on this website covers nominal capacities from 1.2 to 7 tonnes. Confirm availability and the permitted capacity at your load centre and required lift height for the selected truck, mast and attachments.
Can I choose lithium or lead-acid batteries?
Battery options depend on the model and configuration. Share your working hours, charging opportunities and destination electrical supply so the battery and charger can be discussed together. Confirm operating and care requirements in the final specification.
Will a counterbalance forklift handle every pallet?
It offers broader pallet compatibility because there are no front support legs beneath the lifting forks. Compatibility still depends on pallet openings, entry direction, fork dimensions, load position and lifting capacity. Send photographs and dimensions of all pallet types you use.
Can you supply side shift, free lift or an enclosed cab?
Selected mast, attachment and cab options can be discussed before quotation. Confirm availability on the chosen model and check how the complete configuration affects capacity, visibility and overall dimensions.
How should I compare electric forklift quotations?
Compare the same load requirement and complete configuration, not just the nominal tonnage or headline price. Ask each supplier to identify the battery voltage, capacity and chemistry; charger and input supply; mast and lifting height; forks and attachments; and capacity information for that combination. Check whether packing, freight and optional equipment are included, and confirm the currency, quotation validity and named delivery point.
What should be confirmed before placing an import order?
Agree the model and configuration, quantity, payment schedule, production lead time and delivery terms in the order documents. Specify the inspection records, manuals and destination documents you need, and ask LETENG to confirm availability for the actual machine. Set out warranty coverage, exclusions, spare-parts arrangements and the support contact before payment. A document or promise for a different model is not confirmation for your order.
Do you support OEM and private-label orders?
Yes. Branding, appearance and selected configuration requirements can be discussed for distributor and importer projects. Provide the target market, expected quantity and branding requirements so the scope can be confirmed.
Talk to LETENGLet’s specify
Let’s specify
your next electric forklift.
Send the details of the job. We will help you review a suitable truck and configuration.
For a useful first quotation
- Maximum load, dimensions and load centre
- Lift height, aisle width and doorway clearance
- Operating hours and charging opportunities
- Quantity, destination and OEM requirements